How to install
Installation on a Regular Wall
Follow these simple steps to install your wall art securely:
Step 1: Choose a spot and hold the artwork against the wall to decide the perfect position. Using the measuring strip to mark the correct height and alignment.
Step 2: Flip the artwork and check for mounting brackets or hooks. Using a pencil, mark the points on the wall where the screws will go.
Step 3: Wear the gloves to avoid dust and smudges. Next, using a drill machine, drill holes at the marked points and insert the wall plugs into the holes for extra support.
Step 4: Insert the screws into the wall plugs and tighten them, leaving some gap for hanging.
Step 5: Carefully mount the artwork onto the screws, ensuring it sits securely. Step back and check if the artwork is level. Adjust accordingly, if needed.
Installation on a Glass Wall (Using Self-Adhesive Hooks)
Step 1: Wipe the glass wall with a dry cloth to remove dust or moisture. Ensure the surface is completely dry before applying the hooks.
Step 2: Peel off the protective film from the self-adhesive glass hooks provided in the kit. Firmly press the hooks onto the glass at the marked points and hold it for 30 seconds to ensure a strong bond.
Step 3: Allow the hooks to set for 5 minutes before hanging the artwork. Now, carefully place the artwork onto the hooks and check for stability.
Additional Tips:
- If your artwork is large or heavy, consider using extra screws for added stability.
- For glass installations, avoid moving the hooks once applied, as they may lose their adhesive strength.
- If installing on a drywall, ensure the screws are anchored properly to prevent damage.
